(03) 9776 8989

  12-14 Klauer  Street,

Seaford, Victoria  3198

EST 1988

Austruck the one stop shop , we’re moving Australia

 FRP Vans

          Front wall and Side walls: 20mm FRP panel white in color with 300mm gal kick panel.

  1. Rear frame : 50mm uprights fitted with dock rubber & under run bar or step

  2. Rear: Pillars are fitted with hand safety rail each side of door way

  3. Rear Doors: Double rear panel doors fitted with seals, 4 hinges and 1 heavy duty large camlock per door fitted with turn signs and door catches.

  4. Roof section: Aluminum roof bows fitted with pre-stressed 1 piece aluminum roof skin, Aluminum extrusions polished, external bottom, top and front rails fitted off with heavy duty polished aluminum cast corner caps.

  5. Floor frame: 100mm x 50mm channel main runners fitted with 75mm x 50mm RHS cross bearers fitted at 400mm apart.

  6. Floor sheeting : 3mm Checker plate

  7. Mudguards: All compulsory mud guards, reflectors & marker plates.

  8. Lighting: Work lamp Halogen 55 watt fitted at rear back corner, switch in rear No. plate panel or optional to have in body.

  9. L.E.D: 3 side clearance lamps fitted, 2 front top corner clearance lamps, 2 rear top red clearance lamps.


Optional Extras:

 

  1. Nose cone: Fibreglass flush mounted on front wall. 

  2. Rear Step: Full with 200mm checker plate step.

  3. Shoring tracks: 2 per wall with 2 bars to suit width, shoring bar storage at top rear.

  4. Floor: Choice of 5mm steel checker plate, 19mm tongue and groove hardwood, 18mm Hypo-Grip timber.

  5. Battens: Dressed timber or carpet covered battens.

  6. Nose Cone: Fibreglass flush mounted.

  7. Side Door: 900mm Door, Pallet width- single or double with recessed locks.

  8. Rear Doors: Toddco roller door, Aluminium Flat slat roller door, Zinc roller door.

  9. Walk Board: 2400mm slide out walk board, stored under floor.

  10. Tail Board: Full width tailboard with spring and chains.

  11. Load Restraint: Shoring Track and shoring bars.

  12. Tool Boxes: Steel, under chassis tool boxes. Several sizes available.

  13. Tow Bars, Tailgate loaders.

  14. Body Imaging with your Company name or Logo.


FRP and Mono Panel Van bodies