Sandwich Pack Insulated Van 0 to + 4 Deg

• Front wall: 75mm thick Colorbond Sandwich pack construction
• Side walls: 50mm thick Colorbond Sandwich pack construction
• Roof: 75mm thick Colorbond Sandwich pack construction
• Rear Frame: 75mm x 50mm, fitted with under run bar & step or bump rubbers.
• Floor Frame: 100mm x 50mm main runners fitted with 75mm x 50mm RHS cross bearers fitted at 400mm apart with 21mm timber fastened to bearers, 600 oz fibre-glass over timber the flow coat finish
• Floor Insulated urethane: 65mm thick sprayed under floor for that better thermal cover.
• Rear doors: 75mm thick double rear sandwich pack doors fitted with black rubber seals, 3 hinges and 1 heavy duty camlock per door fitted with door catches & smash panels.
• Safety: Handles fitted at doorways and rear pillars.
• Aluminium Extrusion: Polished large aluminium angle & large bottom rail extrusions specifically designed for strength and enhance appearance of body.
• Paint: All paint work on back & side frames are painted in high quality two pack white gloss over steel work to eliminate rust around doorways & under body will be painted in black.
• Mudguards: All compulsory mud guards, reflectors & marker plates.
• Lighting: 3 Interior bright lamps fitted to roof.
• L.E.D: 3 Side clearance lamps fitted, 2 front top corner clearance lamps, 2 rear top red clearance lamps.


Options:

• Floor: 3mm or 5mm Aluminium checker plate over fibreglass. 28mm container plywood floor.
• Side Doors: 75mm sandwich pack door 900mm wide. Pallet width single or double doors, with 1 cam lock per door.
• Rear Doors: Triple rear doors with 1 cam lock per door, Toddco ( Polar) 65mm insulated roller door.
• Bulk Head: Fully insulated sliding wall and Fan kit for multi- temp compartments.
• Door Curtains: Rear and side cold curtains to help maintain temperature when doors are open.
• Load Restraint: Shoring track and shoring bars.
• Tailgate Loaders: Full range of tail lifts to suit your requirements.
• Refrigeration: Range of small engine drive fridge units up to large Diesel and electric.
• Body Imaging with your Company name or Logo.

Tray:

• Floor frame: Heavy duty main runners fitted with 75mm x 50mm RHS cross bearers fitted at 400mm apart with 3mm checker plate floor.
• Side coamings: 100mm x 50mm channel fitted flush with floor sheet .
• Rear: To suit small fifth wheel or Bartlett Ball with air brakes to rear.
• Rear: Of trailer is a semi circular shape to suit trailer , ( no ramps needed )
• Steps: Safety side steps with non slip foot hold at each corner where possible.
• Head board: Shaped frame head board set 50mm above cab
• Tie downs: TNT type floor quicklash system.
• Tool box: 900 x 400 x 400 with drop chains & stainless steel lock and painted black.
• Floor boxes: 2 in floor at front to store straps.
• Mudguards: All compulsory mud guards, reflectors & marker plates.
• Lighting: LED front clearance, & side clearance lamps 3 per side and 2 red rear clearance lamps.
• Painting: 2 pack white and under body black.


Beaver Tail Trailer:

• Front of trailer is semi circular shape to suit tray , ( no ramps needed )
• Heavy duty fabricated chassis beams.
• “A” frame draw bar, to suit slide plate, complete with 16mm safety chains.
• 2 wind down landing legs fitted to main rails.
• Drum brake, grease filled axle on air suspension.
• Air weigh gauge.
• 215/75R 17.5” Bridgestone tyres fitted to 6.50 x 17.5” 8 stud steel rims.
• 100 x 50 channel side coaming fitted flush with 3mm checker plate floor and TNT quick lash.
• TNT quick lash system.
• 900mm long toolbox c/w stainless steel “T” lock.
• Rear fitted with under run bumper.
• All compulsory mud guards, reflectors & marker plates.
• L.E.D. tail lights, front clearance & side clearance lamps 4 per side , and blinker to suit States regs.
• Painting: 2 pack white.
• 2 hydraulic or manual slide out ramps fitted to rear behind light panel.

Colorbond Van

• Floor Frame: Heavy duty main runners fitted with 75mm x 50mm RHS cross bearers fitted at 400mm apart.
• Floor sheeting : 3mm to 5mm Checker plate or timber.
• Rear Frame: 50mm x 50mm RHS Fitted with under run bar & step or bump rubbers.
• Frame Work: 30mm x 30mm RHS tube fitted with 4 tie rails, 150mm high bottom kick panel.
• Roof Frame: Fully aluminium structured roof with Aluminium roof bows and a bonded prestressed 1 piece aluminium roof skin, keeping body weight to a minimum, giving you more payload.
• Rear Doors: Double rear FRP panel doors fitted with seals, 4 hinges and 1 heavy duty camlock per door fitted with door catches & smash panels.
• Sheeting: Sign white colour bond over – off white plywood fix to frame work.
• Mudguards: All compulsory mud guards, reflectors & marker plates.
• Lighting: Hella Led front clearance, & side clearance lamps and 2 red rear clearance lamps.
1 interior flood lamp fitted in top rear of body.
• Painting: All paint work on back frame are painted in high quality primer and two pack white gloss over steel work to eliminate rust around doorways & under body will be painted in black.


Optional Extras:

• Floor: 5mm Checker plate or smooth, 19mm Tongue and groove, 18mm Hypo-grip.
• Side Doors: Pallet width doors, single or double. Toddco roller door. Aluminium flat slat roller door.
• Nose Cone: Fibreglass flush mounted.
• Walk Board: 2400mm long slide out walk board with in floor storage.
• Tail Board: Full width Tail board with springs and chains.
• Load Restraint: Shoring track and bars.
• Tool Box: Under chassis steel storage boxes.
• Tailgate Loaders and Tow Bars.
• Body Imaging with your Company name or Logo.

Austruck the one stop shop , we’re moving Australia

Ausliner the Curtain siders

• Front Wall: 150mm Engineered front wall which meets all load restraint requirements, fitted with heavy duty aluminium ( Structure Flex ) tensioners.
• Rear Frame: Channel uprights fitted with dock rubbers & under run bar.
• Roof Section: All aluminium structured double track to accommodate sliding gates if required. Aluminium roof bows with a bonded prestressed 1 piece aluminium roof skin, keeping body weight to a minimum, for maximum payload.
• Safety OHS: Side non slip safety footsteps fitted to each corner. Safety handles fitted to the front and rear.
• Floor Frame: 100mm x 50mm main runners fitted with 75mm x 50mm RHS cross bearers at 400mm apart.
• Rear Doors: Double rear FRP panel doors, 4 hinges with 1 heavy duty large camlock per door.
• Floor and coaming: Checker plate floor with 100mm x 45mm RSJ coamings and 20mm lip above the floor sheet.
• Curtains: Easy slide curtain system 980 gram polymer, with double roller system with quick release stainless steel buckles at 600mm apart; all straps are fitted with plastic coated hooks. 1 sliding removable centre post fitted to each side.
• Gates: Light weight lift-out gates 1500mm high.
• Mudguards: All compulsory mud guards, reflectors & marker plates.
• Lighting: Halogen work lamps, Hella LED clearance lamps fitted, top - front, rear, side, and blinker.


Optional Extras:

• Curtains: Load rated curtains at 1500kg per pallet space No gates required.
• Rear tensioners : Rear curtain tensioners (structure flex).
• Load Restraint: Sliding load binders in track.
• Gates: Sliding gates suspended by single chain in lieu of lift-out gates.
• Floor: 5mm Checker plate floor.
• Mezzanine decks: Mezzanine floor with see through floors (2 sections ) & and load binders to suit.
• Safety: Reversing camera system 130mm colour monitor.
• Storage: Steel under chassis tool box.
• Nose-cone: Fibreglass flush mounted.
• Tailgate Lifters, Tow Bars.
• Curtain Imaging, graphic designs, cab recolour.

Austruck the one stop shop , we’re moving Australia

Tipping Tray

• Floor Frame: 125mm x 65mm Channel main runners with 75 x 50 RHS cross bearers fitted at 400mm apart with 5mm checker plate floor.
• Side Coamings: 100mm x 45mm RSJ, fitted 20mm above floor sheet and sweep out rear.
• Head Board: Solid H Head Board.
• Rear Panel: Short to suit rear lamps with mesh protection.
• Hydraulics: Single or Twin under body Ram with PTO with electric switches in cab.
• Safety: Under body Safety prop with hose burst valve.
• L.E.D: 2 side clearance lamps fitted 2 front top corner clearance lamps, 2 rear top red clearance lamps.
• Mudguards: All compulsory mudguards, reflectors and marker plates.

Optional Extras:

• Storage: A range of tool / storage boxes to your requirements.
• Tow Bars, Brake controllers, Voltage reducers.
• Load Restraint: Sliding binders in track with 9mtr straps fitted to passenger side.
• Safety: Flashing Beacons, Sign Boards, Arrow Boards.
• All Council specifications and requirements.
• Cranes: Front or rear mounted cranes.

Fibreglass Freezer Insulated -25 Deg

• Front wall: Moulded fibreglass skins bonded over a ridge polyurethane foam core (100mm thick) with pultrusion reinforcement every 600mm.
• Aperture: For refrigeration unit and mounting frame to suit your Carrier unit.
• Rear Frame: Hot dipped galvanised rear frame fitted with bump rubbers.
• Roof: Moulded fibreglass skins bonded over a rigid polyurethane foam core (100mm thick) with pultrusion reinforcement every 600mm.
• Side Walls: Moulded fibreglass skins bonded over a rigid polyurethane foam core (40mm thick) with pultrusion reinforcement every 600mm.
• Floor: 100mm flat non-slip fibreglass floor over 21mm hardwood plywood, reinforced and bonded to 65mm polyurethane foam insulation under side of floor.
• Polished rails: Heavy duty top and bottom aluminium rails and corner caps
• Kick Panels: 3mm thick galvanised steel 300mm high all around interior.
• Doors: Double rear door fitted with heavy duty hinges and camlocks.
• Mudguards: All compulsory mud guards, reflectors & marker plates.
• Lighting: 3 Interior bright lamps fitted to roof.
• L.E.D: 3 Side clearance lamps fitted, 2 front top corner clearance lamps, 2 rear top red clearance lamps.


Optional Extras:

• Floor: 3mm or 5mm Aluminium checker plate over fibreglass. 28mm container plywood floor, Air flow floor system, for better circulation and constant temperature.
• Pallet Skids: 4 Rows of Aluminium Pallet skids.
• Side Doors: pack door 900mm wide. Pallet width single or double doors, with 1 cam lock per door.
• Rear Doors: Triple rear doors with 1 cam lock per door, or Toddco ( Polar) 65mm insulated roller door.
• Bulk Head: Fully insulated sliding wall and Fan kit for multi- temp compartments.
• Door Curtains: Rear and side cold curtains to help maintain temperature when doors are open.
• Load Restraint: Shoring track and shoring bars.
• Tailgate Loaders: Full range of tail lifts to suit your requirements.
• Refrigeration: Range of small engine drive fridge units up to large Diesel and electric.
• Storage: A range of tool boxes to suit your requirements.

Body Imaging with your Company name or Logo.

FRP Vans

• Front wall and Side walls: 20mm FRP panel white in colour with 300mm gal kick panel.
• Rear frame : 50mm uprights fitted with dock rubber & under run bar or step
• Rear: Pillars are fitted with hand safety rail each side of door way
• Rear Doors: Double rear panel doors fitted with seals, 4 hinges and 1 heavy duty large camlock per door fitted with turn signs and door catches.
• Roof section: Aluminium roof bows fitted with pre-stressed 1 piece aluminium roof skin, aluminium extrusions polished, external bottom, top and front rails fitted off with heavy duty polished aluminium cast corner caps.
• Floor frame: 100mm x 50mm channel main runners fitted with 75mm x 50mm RHS cross bearers fitted at 400mm apart.
• Floor sheeting : 3mm Checker plate
• Mudguards: All compulsory mud guards, reflectors & marker plates.
• Lighting: Work lamp Halogen 55 watt fitted at rear back corner, switch in rear No. plate panel or optional to have in body.
• L.E.D: 3 side clearance lamps fitted, 2 front top corner clearance lamps, 2 rear top red clearance lamps.


Optional Extras:

• Nose cone: Fibreglass flush mounted on front wall.
• Rear Step: Full with 200mm checker plate step.
• Shoring tracks: 2 per wall with 2 bars to suit width, shoring bar storage at top rear.
• Floor: Choice of 5mm steel checker plate, 19mm tongue and groove hardwood, 18mm Hypo-Grip timber.
• Battens: Dressed timber or carpet covered battens.
• Nose Cone: Fibreglass flush mounted.
• Side Door: 900mm Door, Pallet width- single or double with recessed locks.
• Rear Doors: Toddco roller door, Aluminium Flat slat roller door, Zinc roller door.
• Walk Board: 2400mm slide out walk board, stored under floor.
• Tail Board: Full width tailboard with spring and chains.
• Load Restraint: Shoring Track and shoring bars.
• Tool Boxes: Steel, under chassis tool boxes. Several sizes available.
• Tow Bars, Tailgate loaders.

Body Imaging with your Company name or Logo.

Tippers

• Floor Frame: Channel main runners with 75 x 50 bearer, finish with 3mm or 5mm floor.
• Head Board: Over top head board solid to top with window with mesh and shovel mounts
• Tail Gate: 2 or 3 way gate (side and up) with or without air gate lock.
• Drop Sides: Drop sides or fixed to suit your high x 3mm with heavy duty throw over catches.
• Rear Panel: Short to suit rear lamps with mesh protection over rear lamps.
• Hydraulics: Well mounted , Single or Twin under body Rams with PTO with electric switches in cab.
• Safety: Under body Safety prop one per side with hose burst valve.
• Steps: Fitted to front corners with safety foot hold.
• L.E.D: Lamps Hella 2 side clearance lamps fitted 2 front top corner clearance lamps, 2 rear top red clearance lamps.


Optional Extras:

• Storage: A range of tool / storage boxes to your requirements.
• Tow Bars, Brake controllers, Voltage reducers.
• Tarp systems: Manual or motorised load covers.
• Safety: Flashing Beacons, Sign Boards, Arrow Boards.
• All Council specifications and requirements.

Austruck the one stop shop , we’re moving Australia

Insulated Curtainsider

• Front wall insulated :150 mm Engineered front wall with heavy duty front Aluminium tensioners. Front wall is fitted with 600mm checker plate pallet protection & sheeted above.
• Rear frame : 100mm channel uprights fitted with dock rubbers & under run bar.
• Safety OHS : Side non slip safety footsteps fitted to each corner, safety handles on front wall, rear fitted with handles and non slip safety footing.
• Roof section : Fully insulated with 75mm sandwich and Aluminium structure double track to accommodate sliding gates if needed and fitted with a pre-stressed 1 piece aluminium roof skin bonded. Fitted with one sliding post to suit.
• Floor frame : 100mm x 50mm main runners fitted with 75mm x 50mm RHS cross bearers fitted at 400mm apart and fully insulate under bearers with urethane .
• Floor sheet : 3mm or 5mm Checker plate
• Side coaming: 100mm x 45mm RSJ Fitted with 20mm lip above floor sheet.
• Gates : 4 Per side 1500 High light weight lift out gates
• Rear doors : Double rear FRP panel doors fitted with seals , 4 hinges and 1 heavy duty large camlock per door fitted with turn signs and door catches.
• Curtains insulated : Easy slide curtain system ( 890 Gram Polymar material ) fitted with double roller system for that easy slide opening ,center lugs fitted to eliminate curtain bellowing.
• Curtain buckles : Quick release Stainless steel buckles at 600mm apart all straps fitted with plastic coated hooks.
• Mudguards : All compulsory mud guards, reflectors & marker plates.
• Lighting : Work lamp Halogen 55 watt fitted at rear top corner , Hella L.E.D. clearance lamps fitted front top , 2- rear top clearance, & 4 side clearance lamps per side.


Optional Extras:

• Insulated Load rated Curtains: 1500kg per pallet space load curtains (no gates required) with all load rated curtains, sliding posts are fitted at no more than 3mtr centres.
• Tool box: Steel 1200 x 500 x 500 with stainless steel Tee lock, mount passenger side.
• Tailgate Loaders: Variety of tailgate loaders to suit your requirements.
• Fridge Units: Small off engine drive units to large Diesel and electric models.

Curtain Imaging, graphic designs, cab recolour.

Maxi light Van

• Front wall and Side walls: 21mm Maxi light panel white in color with 300mm gal kick panel.
• Rear frame : 50mm uprights fitted with dock rubber & under run bar or step
• Rear: Pillars are fitted with hand safety rail each side of door way
• Rear Doors: Double rear panel doors fitted with seals, 4 hinges and 1 heavy duty large camlock per door fitted with turn signs and door catches.
• Roof section: Aluminum roof bows fitted with pre-stressed 1 piece aluminum roof skin, Aluminum extrusions polished, external bottom, top and front rails fitted with heavy duty polished aluminum cast corner caps.
• Floor frame: 100mm x 50mm channel main runners fitted with 75mm x 50mm RHS cross bearers fitted at 400mm apart.
• Floor sheeting : 3mm or 5mm Checker plate , or timber .
• Mudguards: All compulsory mud guards, reflectors & marker plates.
• Lighting : Work lamp Halogen 55 watt fitted at rear back corner , switch in rear Number plate panel or optional to have in body.
• L.E.D: 3 side clearance lamps fitted, 2 front top corner clearance lamps, 2 rear top red clearance lamps.


Optional Extras:

• Floor: 5mm steel checker plate, 19mm Tongue and groove hardwood, 18mm Hypo-grip timber.
• Side Doors: Single door 900mm wide, single or double pallet width side door 1370mm wide.
• Rear Doors: Triple rear doors with 1 cam lock per door, Toddco roller door, Aluminium flat slat roller door, Zinc roller door.
• Nose Cone: Fibreglass flush mounted.
• Walk Board: 2400mm slide out walk board stored under the floor.
• Tail Board: Full width walk board with spring and chains.
• Load restraint: Shoring track and bars.
• Tailgate Loaders: Full range of tail lifts to suit your requirements.
• Storage: A range of tool boxes to suit your requirements.

Body Imaging with your Company name or Logo.

Tub Tippers

Floor Frame: 125mm x 65mm Channel main runners.
• Head Board: Solid to Tub.
• Floor: 5mm Flat sheet floor.
• Tail Gate: 2 or 3 way gate (with air opening)
• Rear Panel: Short to suit rear lamps with mesh protection.
• Hydraulics: Single, Twin under body or Well mounted ram with PTO with electric switches in cab.
• Safety: Under body Safety prop with hose burst valve.
• L.E.D: 2 side clearance lamps fitted 2 front top corner clearance lamps, 2 rear top red clearance lamps.
• Mudguards: All compulsory mud guards, reflectors & marker plates.


Optional Extras:

• Storage: A range of tool / storage boxes to your requirements.
• Tow Bars, Brake controllers, Voltage reducers.
• Tarp systems. Manual or motorised load covers.
• Safety: Flashing Beacons, Sign Boards, Arrow Boards.
• All Council specifications and requirements.

Beaver Tail Tray

• Floor Frame: Heavy duty channel main runners fitted with 75mm x 40mm channel cross bearers fitted at 400mm apart.
• Floor sheeting : 5mm checker plate floor.
• Tie down points : Key holes or 100 x 100 square hole with bar to suit machine.
• Beaver tail : To suit your machine with solid square bars on beaver angle to stop slippage.
• Ramps : There is array of ramps from , Manual Aluminium to Hydraulic split or one piece bi-folds .
• Side Coamings: To suit your machine needs , Large Heavy duty RSJ sections or large Flats.
• Head Board: H frame or pipe head board to suit carrying supplies or safety light bars.
• Tool box’s : 1200 x 500 x 500 with drop chains & stainless steel lock and powder coated black.
• Mudguards: All compulsory mud guards from steel to large plastic, reflectors & marker plates.
• Lighting Hella : Led front clearance, & side clearance lamps 3 per side and 2 red rear clearance lamps.
• Painting: Prime over all steel work , sealed and painted in 2 pack white and under body black with grey decks , painting can be done in company colours with logo’s.


Optional Extras:

• Hydraulic ramps : Single one piece ramp, bi-fold large ramp or 2 single ramps.
• Hydraulic winch : 8000 to 10,000 lb with cable and lead rollers.
• Tow Bars, Tool boxes, Load binders ,Water wash bottles, Chassis extensions , Cab paints.

Austruck the one stop shop , we’re moving Australia

Trays

• Floor Frame: Heavy duty main runners fitted with 75mm x 50mm RHS cross bearers fitted at 400mm apart.
• Floor sheeting : 3mm or 5mm Checker plate.
• Side Coamings: 100 x 45mm RSJ fitted 20mm lip above floor sheet and sweep out rear.
• Head Board: Heavy duty H frame head board set 50mm above cab. 600mm checker plate lower infill.
• Mudguards: All compulsory mud guards, reflectors & marker plates.
• Lighting: Led front clearance, & side clearance lamps 3 per side and 2 red rear clearance lamps.
• Painting: 2 pack white and under body black.


Optional Extras:

• Head Board: Pipe head board set 50mm above cab. 600mm checker plate lower infill.
• H-Racks: Removable solid mounted H racks, 1 centre and 1 rear with storage at front inside floor.
• Drop Sides: Split 300mm drop sides and anti loose fasteners with removable centre post.
• Gates: Side and rear lift out gate to suit height of head board.
• Tool box: 1200 x 500 x 500 with drop chains & stainless steel lock and painted black.
• Load Binders: Sliding binders in track with 9mtr straps fitted to passenger side.
• Roof bows: To suit if fitting tarp.
• Floor: Choice of 5mm Checker plate, 28mm container hardwood, Tongue and groove hardwood.
• Twist Locks: Container twist locks with packer blocks to suit.

Tow bars , Tailgate loaders, Cranes.